Posted by Bruce from Can. on April 01, 2018 at 10:09:27 from (76.69.31.140):
In Reply to: CIH 5140 posted by Paul swPa on April 01, 2018 at 09:02:14:
I Had a CaseIH 5140 , I bought it used with about 2200 hours in about 1995 . At the time this was the biggest tractor that I had ever had and I thought that I had died and gone to heaven !! And it really was a good tractor , I kept it until 2014, and it had about 8000 hours on it when traded. While I had it I added a CaseIH 510 loader and this really made my 5140 a truly great tractor for me. Lots of power for my needs, and plenty of hydraulic power, and a smooth running 6 cylinder . Decent cab with air also added to the enjoyment of this tractor for me. Now the bad,and there really wasn't much bad , just some age related things. The electric switches that control the power shift , and forward revers were starting to act up. And I did find the over head air venting blowing on you and obstructing your view was a pain in the butt. On newer tractors the air vent tend to come up from the steering console , and you get full floor to roof clear view. Doesn't sound like much, but I got real sick of leaning down trying to see wear I was going , and where that loader disappeared to as the loader rose. You can live with it, but it will wear on you if you run the tractor a lot doing loader work., I also hated myself leveling loader , but that had really nothing to do with the tractor itself. One thing that did bother me , even though I never had any trouble with it on my tractor. I understand that the hydraulic pump for this tractor is a internal pump , and is specific to this model series , and only available through CaseIH , and CaseIH is not real good at providing parts of this nature , for tractors over 20 years old. I have no idea if this is true or not, but might be something to look into. I don't think any company is going to continue to make and stock parts for tractors after they get to a certain age, and after market stuff likely won't be available for tractors built for such a short build period. I am not trying to scare you away from this tractor, they were a great tractor , in 1992. This is 2018 , and a different owners now control Case IH. Bruce
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
