Power steering problem U joint wear? Worn out pump? I had a Perkins 3 banger in a MF 35. Rock solid, fuel sipper. If the multipower goes out can you run without it rather than having to fix it? How is it in a tight turn, being long wheel base and all? Main use would be to run a 1000# 6' drum mower that mounts like a disc mower...lot of weight to the curb side. Bracket for front weights but no weights....lot of cutting square corners if possible.
Wants 5500 US but will transport for me to my place for that. Real clean, original paint, looks good, obviously been barn kept. Says it has 2000 actual hrs (wonder about that and hour meter doing the recording) and everything works, new rubber, F1 rears. Sorta hesitant to spend that for a retired guy to use just for the mower. Have 4 other tractors to do the other chores. It could run my JD 375 roller if I got in a tight with the regularly used tow machine. May hook a plow behind it but don't do much of that anymore.....going to perennials for my hay crops.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
