Posted by Leroy on April 15, 2018 at 06:42:53 from (66.118.123.39):
In Reply to: grain wagon posted by Howard Parker on April 14, 2018 at 20:41:08:
I would say Fir or Pine as both are strong enough and lighter weight than any of the hardwoods and total weight was a big consirn at the time those beds were made. They wanted as light a weight as possible to give more carrying capacity without going over the rated capacity of a running gear the bed was put on. And in the day of a hundred bushel rated bed a hundred pounds heavier made the load allowed 2 bushel less and 2 bushel was a big thing then. Not now when loads are 500 bushels or more. And back in the day a bed made out of the heavy wood like oak was called a horse killer. You take a wagon and lay the floor of a light weight wood on and try moving things by hand, notunload that and load it up with the oak and see how much harder it is for you to push it by hand. And factory wagon beds were pine for the stringers for its strength and lighter weight. Beds were made with the same toung and grove flooring that was ysed to make the porch on your house that is called 4" but actually has a 3 3/4" coverage and if it would stand the weare and tear and weather on your outdoor porch on your house it would stand the use in a wagon bed floor. Over the last few years I have bought dozens of flat hay-grain wagons for an Amish machinery dealer I work with supplying him with things not avaible in his area and If I see a wagon with a hardwood floor I would not even bid on it. And I have wagons setting here now for my own use that have that pine toung and grove porch flooring in them.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
