Posted by jeffcat on April 16, 2018 at 07:45:47 from (76.116.234.200):
In Reply to: cub lo-boy posted by ohiojim on April 15, 2018 at 17:56:03:
For a CUB. Both machines should be the same . My 1977 standard CUB not a low boy, go buy a brass 1/4 pipe plug. Grab a pair of big vice grips, and some teflon tape. I will tell you the EASIEST way to check the level. Take the bolts out of your shifter and lift it up. Look down into the tranny on the left side of the tranny and you will see where the level hole is. The oil level is only an inch 1/2 or so. Now if you want to make the effort and do it legit here is what I had to do. Remove the left wheel. Remove the left hub. Remove the left fender. Now you will find the little oil level plug in the left side of the tranny. Mine was a total bear to get out. Broke a correct 8 point socket, then stripped the plug, and then used a brand new pair of number 10 vice grips. That new brass plug will always come out. Not the easiest thing to get at. Very little room to work.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Question for Dads This recent topic from the Tractor Talk discussion board is being highlighted because it is an awesome display of the caliber of individuals that have made this site their own. The young person asking questions received positive feedback and advice from total strangers who "told it like it is" with the care many reserve for their own kids. The advice is timeless... so although it isn't necessarily antique tractor related, it will be prominently displayed in our archives to honor those who have the courage to ask and those who have the courage to respond in an honest, positive manner.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
