Better explanation of my problem with shaft bending on my Ford 600 tractor: First few times this happened we had put the mowing deck on the tractor. When raised the mowing deck it just kept going up and up til it bent the drive shaft and the pulley housing on the mower but we were able to lower it back down to the ground. We just got the drive shaft and the pulley housing on the mower fixed again and put them back on the tractor. This time the mower deck kept going up and up until it bent the drive shaft again and the pulley housing again, but this time when we went to lower the mowing deck back to the ground it only went down about half-way and stopped. We took the mowing deck off of the tractor and the arms on the tractor went down. We again straightened out the drive shaft and the bent pulley housing and put them back on the tractor. This time, the mower would only raise up about six inches off the ground and the touch control lever was tight and would not pull up all the way. We have had this problem worked on several times with no satisfaction yet and are out over $800 in mechanic fees not to mention the cost of having the drive shaft straightened and the mower pulley housing fixed. My husband and I will NOT be taking it back to the mechanic we took it too and he was a tractor mechanic. We have 2 Ford tractor shop manuals and if possible would like to try to fix this problem ourselves. The tractor mechanic said he replaced several things on the tractor, I assume dealing with the hydraulics since my husband did not keep any receipts for me to see what the man did. This has been going on since last year and we can't even use the tractor. We have four acres and we like to keep it mowed. We are not mechanics but willing to do what we can so maybe our son who knows how to work on cars can be of help with what we can't do. Getting desperate but don't want to have to buy another tractor. Thanks for any help and advice you can give us.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Old Time Threshing - by Anthony West. A lovely harvest evening late September 1947, I was a school boy, like all school boys I loved harvest time. The golden corn ripens well and early, the stoking, stacking,.... the drawing in with the tractors and trailers and a few buck rakes thrown in, and possibly a heavy horse. It would be a great day for the collies and the terrier dogs, rats and mice would be at the bottom of the stacks so the dogs, would have a busy time hunting and killing, all the corn was gathered and ricked in what we c
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
