Eldon Since those front tires are tubeless I would put a good tire sealer in them NOW. I have it in several of the tractors I use that get thorns and such in them. I am not talking the "fix-a-flat type of stuff. I am meaning a true tire sealer. Reseal is one brand name. Slim does make one too but they make others that are not easy to clean up later. So watch which one of those you get. I use JDs just because it is a good price around me. They will keep the rim lubricated and the JD stuff is water soluble. So in the future if you want to switch the rims or even do a conventional patch on the tire all you need to do is wash the tire/rim with water. This sealer stays a liquid and just rides along until you have some thing puncher the tire. It then seals the leak.
How I would do your front tires is take them off and lay them down. Break one bead down. Then just pour a gallon of the sealer in each tire. Inflate and reinstall, your done. In tubeless rear tires I usually put 2-3 gallons per tire.
You can buy the JD sealer in a Gallon jug with a plastic pump and 5 gallon pails. There is a pump for the five gallon pails too. I bought one because I use a lot of this in Garden tractor tires. It also is great in low pressure ATV tires. You do not have to have a pump if your doing like I stated. The sealer will keep in the jug/pail for a long time. I have a five gallon pail on my pump right now that is several years old. Every month or so ( when I think of it) I just pump a couple of stokes into the pail to keep fresher product in the pump. On a pail in storage just shake it around every now and then.
TY 16236 one gallon with pump $41.50 TY 15833 5 gallon Pail $109.50 TY 6379 Pump for 5 gallon pail $ 75.81
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Lifetime of Farm Machinery - by Joe Michaels. I am a mechanical engineer by profession, specializing in powerplant work. I worked as a machinist and engine erector, with time spent overseas. I have always had a love for machinery, and an appreciation for farming and farm machinery. I was born and raised in Brooklyn, New York. Not a place one would associate with farms or farm machinery. I credit my parents for instilling a lot of good values, a respect for learning, a knowledge of various skills and a little knowledge of farming in me, amo
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.