Posted by keith true on August 19, 2018 at 17:14:32 from (174.63.60.234):
In Reply to: Stuck lug nut pic posted by old560 on August 19, 2018 at 14:50:16:
I don't do much car work,but I probably do a half dozen of those a year,and mostly on Jeep or Chrysler products.First I whack the end of that lug with a big punch,my punch is made from a John Deere drag link,so it has a 1 inch diameter.You need to use a real hammer,like a 4 pounder or bigger.That will help shock any bond between the aluminum wheel and the lug.Then I pick out a big socket that feels like it might be close to fitting.I stick that on the end of an extension and heat the socket cherry red.Then I drive it on the lug with a sledgehammer.If it goes on easy you need a smaller socket,if it drives on hard it will most likely be OK.I have buckets of old sockets to sacrifice.Since doing it that way I haven't had to go to plan B.The local Walmart sends these things to a garage near them,my buddy there sends them to me.He knows I have more patience than he does.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Belt Pulley? Really Doing Something? - by Chris Pratt. Belt Pulleys! Most of us conjure up a picture of a massive thresher with a wide belt lazily arching to a tractor 35 feet away throwing a cloud of dust, straw and grain, and while nostalgic, not too practical a method of using our tractors. While this may have been the bread and butter of the belt work in the past (since this is what made the money on many farms), the smaller tasks may have been and still can be its real claim to fame. The thresher would bring in the harvest (and income) once a y
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
