Posted by 4play on August 24, 2018 at 20:13:54 from (12.235.184.17):
In Reply to: OT-mini-van posted by tomturkey on August 24, 2018 at 15:52:39:
When you turn to start and nothing happens, does the key spring back normally when you let go of it. Do any of the accessories shut down in start pos, radio, HVAC etc, like they normally would when in "start" position" Do you feel the detents in each position of the key/switch?
The ignition switch is not adjustable, it is mounted with two T30 torx bolts on the bottom of the steering column. You will have to remove the lower dash trim panel and metal shield to access the switch. Once ignition switch is off, keep it plugged in and move the metal peg sticking out of it to see if everything works and starts. You can also look up inside the column to see if the linkage is moving all the way forward/back. There is a plastic piece (actuator) buried in the middle of the steering column that is know to break also, this usually doesn't allow any movement at the ignition switch when it breaks, meaning the switch will stay in whatever position it was in when the actuator broke.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
