Posted by Dick L on September 06, 2018 at 04:49:29 from (50.51.74.220):
I thought I had 10 or so bales to bale which is what I got off the second cutting off the same area. I see it was going to be more when I raked it around 10 am yesterday. I baled it around 5 pm yesterday when it was still 90º with the heat index at 97º. I got 27 bales dropping them on the ground and started picking them up with the loader and putting them in the horse trailer after cooling off in the house for a half hour where I see rain head out way on the radar. It was 8:30 pm by the time I had them in the trailer and back in the house soaked with sweat. I brought 2 bales at a time from the field to the trailer behind the house. I scoop up one bale on the go with the loader bucket and lift one bale on top of the one in the bucket. Bales around 40 pounds which is almost my limit to lift anymore.
Start to finish should have been an easy hour job. Set in my easy lift chair after I was done wondering how this all came about. Setting on the tractor watching the windrow going into the baler and hearing the knotters tie a bale every little bit and see them on the ground I felt like I did a 15 when I took over Dads custom baling. Five hours later feeling like I was 90 years old ready for a nursing home.
Good thing is I woke up this morning no worse for the wear and ready to get after what ever is ahead for the day.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
