As just about everyone else has said, the N-series tractors are not great choices for snow removal. Anything with live hydraulics will be a better choice.
Anyone who says you can't use a tricycle-gear row crop tractor for snow removal probably hasn't actually used one. On ice and deep snow, you'll rely more on brakes for steering than the front wheels, and the tricycle front end can turn shorter than a standard. Most row-crop tractor sit higher than their standard equivalents, giving them a slight advantage in deep snow. My tractor is a row-crop Ford 4000 (essentially a 961), and I've used it for snow removal for almost 20 years. I have chains and ballast in the tires. It wasn't that great until I broke down and got a heavy rear blade for it, a 7 foot Woods HBL84-2. Before that I had a lightweight 6 foot blade that tended to float over the snow, was too narrow and lacked offset. Note that a new blade like mine will blow most of your $3K budget.
Personally, I think you won't be able to find a satisfactory solution for less than $3K. If you already own a 4WD pickup, mounting a blade on it would do the job; just don't succumb to the temptation of doing snow removal on the side if you want it to last. But if you only do your own lot it should last a long time. Don't think about using a salt spreader; they are death to pickup trucks.
Another thought is to find a used plow truck that still runs. It will be a rust bucket, but if it never leaves your lot, who cares? It just needs to start reliably.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
