Posted by valiant farmer on September 11, 2018 at 01:40:31 from (122.57.141.156):
Hi all,
I have a David Brown 850 that the hydraulics aren't working on. My uncle bought it from a scrap metal yard, fixed it up and got it running. The hydraulics always were terribly slow going up, and it took two of us to jump it down (as the shaft end by the TCU was seized. I have pulled that apart and cleaned it up and it moves smoothly now.) One day it decided to quit working (just when we were needing it desperately!). He always ran 80-90 gear oil in it, but now I am wondering, is that to heavy a grade oil to run the hydraulics? The pump is giving next to no pressure, and the pump bushings are done for. I have seen a video where someone fixed the hydraulics on their 880 (same hydraulic system as mine) and they said that it ran 100% better and faster when they put 30 or 40 weight motor oil in the gearbox.
Does anyone have any experience with this DB hydraulic system?
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.