Posted by rrlund on October 13, 2018 at 12:42:30 from (173.225.203.235):
Wouldn't you know,today is near perfect. We went color touring in northern Michigan Wednesday,Thursday and Friday. Wednesday was nice for the drive up,the rain didn't start until around three o'clock. There's an overlook called Eagleview that overlooks the Manistee River up on Lund road between Lake City and Fife Lake. The colors were half way decent. Thursday was windy,cold and rainy. We drove up to Petoskey. The waves were breaking over the pier at the lighthouse. We went on up and drove the tunnel of trees between Harbor Springs and Cross Village. I sure wish it'd been a nicer day,but it was a beautiful drive on the bluffs about Lake Michigan despite the weather. The lake sure was rough at a little roadside park between Petoskey and Charlevoix. I wouldn't have wanted to be out there on a boat or a ship of any size. We drove over to Grayling Friday morning,wanted to ride bike from Grayling to Hartwick Pines,but it was snowing. No thanks.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
