I’m over by New Ulm. We got a brief weather window to get the beans in, and could slog out most of the corn. There are still a few corn fields left out there.
The ground can be pretty muddy, could need to dry some.
More likely the beans themselves are too wet. If you missed that brief weather window here for beans, they got rained on and it got cool and no sun and the beans went right back up to 18-20% moisture, which is way way too wet. Beans need to be down to 13%.
It’s possible the beans were too wet, he worked on corn, and concentrated on corn getting that done, and hopes to now come back for the beans. This year the weather did not cooperate from April through today, it was just horribly miserable year. It hasn’t played nice with us at all any step of the way.
Now might as well wait for the harder freeze and get what you can on the beans. They will still be too wet, but the forecast doesn’t lend to them ever drying in the field this year.
It’s certainly possible to get behind the 8 ball financially, but at combing time, you will find a way to get the beans combined, it would be a waste of dollars to ‘let them rot’, even if you are way way behind on your loans, the banker would lend you enough for fuel to get the crop in and take the $$$ crop.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
