What size tire do you plan to run, next thing up from a 7.50-16 is a 10.00-16 which is a fairly big tire, I have them on my 6610 and don't like them because they're too tall.
Look at going to 15" rims, for your 3000 7.5L-15 tires are nearly the same height as 6.50-16 but are 1 1/2" wider or 9.5L-15 is nearly 3" wider at 9.5 "
I have 7.5L-15 on my 4000SU which has same front axle as a 3000, 7.5L misses the spindle by 1/2" or less, don't know if you can get a wheel with enough offset to get a 9.5L to clear the spindle
For the 5000 a 9.5L-15 is a little shorter than 7.50-16 but is 1 1/2" wider at 9.5" wide or the 11L-15 is same height as 7.50-16 but is 11" wide.
I plan to swap the 10.00-16's on my 6610 for a set of 11L-15's which are the same width but nearly 3" shorter.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Black Tire Paint - by Staff. I have been fortunate in that two of my tractors have had rear tires that were in great shape when I bought the tractor. My model "H" even had the old style fronts with plenty of tread. My "L" fronts were mismatched Sears Guardsman snow tires, which I promptly tossed. Well, although these tires were in good shape as far as tread was concerned, they looked real sad. All were flat, but new tubes fixed that. In addition to years and years of scuffing and fading, they had paint splattered on
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
