Posted by Jon f mn on January 07, 2019 at 08:32:29 from (174.219.2.124):
Not much tractor related this weekend. Spent Saturday working on the garage door. It wouldn't lift easy, I believe because it originally had a lightweight door that was replaced by an insulated door which was too heavy for the springs. So first it got new springs which made it work good. Then I put in an opener. That took longer than I would like to admit. Lol. Then added new seal under the door and seals outside where there were none.
By the time I went to town and got that done Saturday was about shot. But the queen is very happy, so things are good in the kingdom.
Yesterday I worked on getting projects in the shop first. Getting the 1030 started was tough, the batteries were bad so I tried to pull start it first, but there was so much ice and it was so warm that the DC couldn't get enough traction to pull it. After some wasted time there I remembered I had 2 good batteries in the shop, so with two good batteries it started right up. So I was able to use it to pull the 400 in the shed to get worked on. Going to pull the block on it and have it bored because the counter bores are bad. And the 1030 needs some work too, a water pump and new fuel lines etc.
The rest of the day I spent piling up a bunch of junk wood that was laying around. There was a pile from an old deck, some old fence posts and feed gates that we're rotten and such. Most of it was burried under snow and froze to the ground, but the DC and loader worked good for digging it out. Sadly the water pump went out on the DC too. Must be the time for water pumps.
Then last night it was time for a bon fire to burn the pile. The weather was good for it, the snow kept it from spreading or getting too hot, and the wind was in the right direction to keep the Sparks away from everything. Had a bit of trouble getting it going because of all the snow, but once going it burned good.
The fire burned all night and still had a pile of coals this morning. I had hoped to get to the tin on the quanset shed this weekend, but that didn't happen. Maybe next weekend.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
