Out of all the choices given, I guess clueless (more correctly "ignorant") would apply to me, which is why I raise my hand to ask questions. Or as I like to say, even brain surgery isn't hard to do if you know how. But if you don't, you better ask questions before you start.
The notion of installing a backup generator has been rattling around in my head for a while now, so I've been seeking advice now and then from folks I believe could help.
Most recently, that was a tech guy from our local REC who was here to swap my old meter for a digital one. I asked him if installing a backup generator would be OK and his only response (he was in a hurry) was YES, it's OK, people do it all the time. No mention of a transfer boxes, switches or NEC code. Since he worked for the utility, I would have thought that would have been the first thing out of his mouth?
My assumption was that if a person flipped the main at the meter there would be no chance of backfeeding into the utility line. I think that technical standpoint, that remains true.....but is also a system that is prone to error. A transfer box/switch makes it less likely to screw up and is an overall better system to use.
So now that I know what to look for, I'm amazed at how the inner workings of a transfer box are glossed over, and that includes many of the company websites. Come to think of it, I don't think I've seen any mention of it on this thread either. Transfer boxes mentioned? Yes......why and how they work and why I need to have one and they are required by NEC code? Not so much.
After a bit of searching, I did find this......part 1 of a 6 part series on transfer boxes. For me, this is when the light came on!
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
