|
Tractor Talk Discussion Board |
Re: Re: Re: Re: What is a 'LIVE' PTO?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by paul on September 12, 2001 at 04:59:04 from (199.3.9.99):
In Reply to: Re: Re: Re: What is a 'LIVE' PTO? posted by dan on September 11, 2001 at 01:34:27:
Live pto of some version is much prefered. If you have/get a tractor without it, every time you step on the clutch, the pto equipment will also stop. If you are baling or blowing snow, this means you will not be able to stop moving to allow 'bunches & slugs of material' to run through the machine. Also, you can not easily start up the machine & then start moving forward - you start both the machine & forward motion at the same time. Without live pto, you need an over running clutch ($70 item) on your pto to operate safely with many implements. Look up 'ocr' or such in the archives for a lot of info on these issues. There is also 'live hydraulics' which is similar to the pto issue, all hydralic action stops when you push in the clutch without live hydraulics. Not good for loader work, etc. Various models of tractors did not have live pto well into the 70's at least, so you need to look at the individual tractor to be sure. --->Paul
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
