I've been around pulling for 55 years and have seen everything imaginable happen....I will hopefully be hitting the track in late May with the Pro Field IH that is pictured....It makes about 1000 horses and the former owner parked it 6 years ago with a burnt piston...I'll be dropping down a class with it..
Also pictured is a alky G-1000 MM puller that came apart badly..They are good for 1 run or maybe 100 runs if you get lucky..Several pullers in my area run 2700-3000 horse Pro Stock tractors and if they get lucky can run an entire season with just rolling in a set of bearings every so many passes..A friends 1060 horsepower IH puller made it thru the entire 2018 season with no maintenance..This year he's shooting for 1200 horses..
The tractors in the video are Pro Stocks that make about 3200-3500 horsepower....Some make it an entire season with minimal maintenance while others don't..All national level indoor pulls have sand at the end of the track for safety...One of the pictures at the top of this thread shows the smoke exiting the building at Louisville so thats where it goes...In mid March I'll be attending a big indoor pull at Hale Arena in Kansas City..
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.