Posted by Billy NY on March 02, 2019 at 07:28:37 from (74.70.73.136):
In Reply to: Re: Late model posted by RedMF40 on March 01, 2019 at 09:32:38:
My experience with this is you would have to take that standing grass and harvest a hay crop 1st or cut it with a rotary mower numerous times working the cut depth from high to low, shred it, wait until the rain and weather starts to break it down, cut it and shred again before plowing if need be. At some point it will be broke down enough to not be so difficult to plow, and the rains will leach the nitrogen from the trash right into the soil. I've cut and plowed before with mixed results, not worth dealing with the plow plugging up. Sometimes it worked, but keeping that plow at the right depth makes a huge difference. I am not sure if trash boards would help with so much tall grass not connected with roots anymore. If the plow goes too deep, the sod won't roll over and the trash just seems to then plug up the plow real easy. I've seen some do this in tall grass with better results, but most would take the hay crop 1st.
I think it's far better to either plow it sooner when the grasses are much less mature, and in this case, make some changes to get better coverage, there is a lot of green showing that will likely come right back. Who knows what he has planned, the soil conditions etc. It's definitely good to turn that lush green into the soil, my preference being when it's still young and not stalky. I've done that in my garden, sure seems to give it a nice natural dose of nitrogen.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.