Posted by JD Seller on March 18, 2019 at 19:52:57 from (208.126.198.213):
In Reply to: Farm gates posted by Shaler on March 18, 2019 at 04:40:42:
I only buy Sioux Gates. A good gate will cost $20 a foot. The Sioux gates have a life time warranty. There best gate is the Victory model. They make them in 60 and 50 inch tall gates. They have 2 inch x 16 gauge steel tubes. A 16 foot tall Victory gate weights 186 lbs. Not light at all.
If I have time I build mine. Not as cheap as you can buy them but I use heavier tubing and gusset the corners and middles. All our sorting gates we build. I make them a full 70 inches tall and use 2 inch x 3/16ths square tubing. I have never had a steer/bull/cow break one. I have had them break the hinges but never bend the gate in the middle. My home built 16 foot gates weight just under 300 lbs. If I hang one on a single post I usually put a support wheel on the free end. Keeps them from sagging.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Cautionary Tale - by Ian Minshull. In the early 1950s my father bought an Allis Chalmers B and I used it for all the row crop work with the mangolds and potatoes, rolling and the haymaking on our farm. The farm and the Allis were sold and I have spent a lifetime working on farms throughout the country. I promised myself that one day I would own an Allis. That time event
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
