Tractor Talk Discussion Board |
Re: Considering another tractor, need advise on make/model
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by B.C. on October 15, 2001 at 10:47:17 from (131.167.75.193):
In Reply to: Considering another tractor, need advise on make/model posted by Phil on October 04, 2001 at 13:02:49:
Our first tractor was an Allis B with a county belly mount mower. We sort of used it like you describe but like others have said, getting that mower on and off was half a day of sweat, swear and good luck. We did manage to maintain the finger count but it was close some times. The tractor could seem light sometimes hauling wagons. One of the neighbors later had a N series Ford with a belly mount mower for kind of the same deal but he ran into the same problems and he got rid of it. I would think a wide front WD, WD45 or D17 would be about what you want. The D17 would be the most bucks but just might have a factory three point and I bet you would like it. I'd say Massey 50 or 65, but that would probably run more than you may want to pay.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|