Posted by buckslayer9000 on June 02, 2019 at 19:37:01 from (204.16.59.5):
Hello, I have a 1370 that i am having issues getting the hydraulic remotes to work. So last fall I had to replace the PTO shaft. The guy that was using this tractor some how stripped it out....dont ask me how. So i proceeded to follow the procedure to replace it and everything went fine. However, my remotes no longer work. To me it sounds like there is air in the system. It is making that sort of noise. I thought that it may have drained enough oil when I replaced the PTO shaft that the pump was able to get air into it. I spent most of the trying to bleed air from the flow divider and pump lines before the remote valve. I did seem to get a little air out and now I have 1 set of remotes working very slowly in one direction, but not the other. The PTO, power steering, brakes all work just fine. It is only the remotes that are struggling to operate. I have read that some guys have issues clogging the inlet screen in the sump, but it sounds like that takes out all systems, not just one. Any help would be greatly appreciated!
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Good As New - by Bill Goodwin. In the summer of 1995, my father, Russ Goodwin, and I acquired the 1945 Farmall B that my grandfather used as an overseer on a farm in Waynesboro, Georgia. After my grandfather’s death in 1955, J.P. Rollins, son of the landowner, used the tractor. In the winter 1985, while in his possession the engine block cracked and was unrepairable. He had told my father
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
