Tractor Talk Discussion Board |
Re: Steam whistle air pressure?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Allen on December 11, 2001 at 19:54:48 from (207.44.55.177):
In Reply to: Steam whistle air pressure? posted by Robert in Md. on December 11, 2001 at 19:16:38:
Steam whistles will usually sound thin and thready (yes sometimes harsh) on air. The operating pressure is about the same as on steam. (pressures too high will damage the whistle) The problem is steam acts different than plain old compressed air, so some of the usual harmonic overtones are absent. Some people have tried to richen the sound by injecting water into the air line, it helps some, but makes rather a mess. What actually sounds even worse is when you blow a whistle designed for air on steam...you get some really weird dissonance
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|