Posted by RedMF40 on August 02, 2019 at 15:20:02 from (172.58.184.74):
In Reply to: Did the baler work? posted by gotmyfarm! on August 02, 2019 at 14:22:47:
Thanks for the report, sounds like the baler is trying--it's just the tying part that needs help. Sorry I have nothing in the way of advice there.
For the flakes, I'd give some to the ponies right away, see how they like it. If they're happy with the hay, then you were successful in producing some food for them. If they leave it alone, probably means they're just not in the mood or want to look it over some more.
Can you store some in an empty stall, maybe put some chicken wire around, pile the flakes in there? As long as it's under cover I'm sure it'll be fine. You'll be handling it all yourself so you'll know if any critters or contamination got into it. I'm sure someone here can help with troubleshooting the baler. From the terminology you tossed around, sounds pretty technical and specialized. Good thing you have the manuals!
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
