Posted by JD Seller on August 04, 2019 at 21:22:43 from (208.126.198.213):
In Reply to: Low Oil Pressure posted by ramo77 on August 04, 2019 at 19:45:06:
Well The hours are more than likely not correct. Those tachometers just did not last long so it would be really rare for it to be the original. Also a 66 year old tractor only having 495 hours would make the tractor very valuable and in pristine condition not losing oil pressure when running at operating temperature.
The oil pressure your seeing is inline with a worn Ford motor of that vintage. With cam shaft driven oil pumps you see more of a difference between low and high RPMs. This is one reason most modern engines have crankshaft driven oil pumps.
Also I am not a big fan of multi grade oils in older motors. Especially ones with wear. I would try some straight 30 weight oil in the motor and see what that does. Now this is for summer usage. For winter go to a 10w30 oil. A 15w40 oils is more a diesel engine oil.
These old Ford motors where not long life motors. When farmers around here where using them hard, they would overhaul the motors every 3-4 years. An overhaul kit did not cost much and usually the crankshaft would be fine. Most farmers could do the majority of the work themselves. The trouble was most of these tractor only got inframe overhauls unless the rear seal was leaking. So the cam bearings were rarely changed. Motors with the type of oils system your tractor has you could very well have worn cam bearings causing the lose of oil pressure.
So change the oil from a multi grade one and run it unless you want to spend the money to overhaul it. To do it right could easily be $1500-2000 with machining and little outside labor. If you hire it totally done it easily could be $2000-2500.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
