Hey John, fun question for us sparkies. For years and years I have read articles stating the current a set of mechanical contact points switches on Kettering Ignition systems should be limited to no more then 4 amps otherwise the points will burn prematurely but I have no idea as to the quality and current rating of your ignition points so they may be more or less ???
Of course I cant envision wiring two so called 12 Volt coils (if that's what they really are???) in series on a 12 volt system meaning each only sees 6 volts but that would reduce the current the points must switch and increase their life. If the spark energy is still sufficient it may still "work"
But if you run them in parallel which cuts resistance in half the points may burn too quick???
At tractor shows Ive seen conversion kits (for points and coil ignitions) that only use the points current as a trigger so they carry low current and Im sure you are familiar with the old Capacitor Discharge boxes that were easy n simple to wire and they can reduce points current.
I would be tempted to try them in series as that reduces points current and see if the spark is sufficient??? If you want to insure 12 volts on a 12 volt coil (run 2 in parallel) Id try one of the conversion kits and/or an old CD ignition box.
As you're well aware the condenser needs matched to the coil, but if you run two in series or parallel Id imagine that should change but that's deeper math then I want to get into now lol. Condensors add capacitance if in parallel while Inductors (coils) add inductance in series soooooooooooo if you ran two coils in series perhaps you should run two condensors in parallel THINK ABOUT IT. If you ran two coils in parallel the inductance cuts in half so maybe a condenser with 1/2 the capacitance NO WARRANT LOL PLAY WITH IT
Many two cylinder engines like some of the Onan gensets used two terminal ignition coils, might something like that work ????
Hey you have fooled with this type stuff for years I'm sure and am confident you will experiment and come up with the best results BUT LET US KNOW WHAT YOU END UP WITH !!!!!!!!!!!! I used to convert old outboards over to elec switches and that was fun.
Fun chat
John T Too long retired n rusty electrical engineer to answer this
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Show Coverage: Journey to Ankeny - by Cindy Ladage. We left Illinois on the first day of July and headed north and west for Ankeny, Iowa. Minus two kids, we traveled light with only the youngest in tow. As long as a pool was at the end of our destination she was easy to please unlike the other two who have a multitude of requirements to travel with mom and dad. Amana Colonies served as a respite where we ate a family style lunch that sustained us with more food than could reasonably fit into our ample physiques. The show at Ankeny
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.