My tractor has duals, I need a 15 foot wide door for the tractor.
My cab flashers mostly make it in a 10 foot tall door but close.
So neither you mention is really worth a crap to me, I would want a worthwhile door.
On my shed I put a 24 wide by 15 foot 9 inch door. My hay basket full of hay gets close on top, my combine bean head just squeezes in.
Most of my message isn’t helpful to you. I will add this, which may be:
When I had them put the 24 by 15-9 door in, I figured that would be plenty wide. When I drove in with the bean head and with my 3pt 15 row bean planter, I was nearly scrapping both door jams. Huh?
Turns out, my “door” is 24 feet, the opening in the building is 23 feet 6 inches.
I really miss that 6 inches. It works, but it would work better if it were 6 inches wider......
Be sure you are getting the hole size, not the door size!
And, bigger is better, I don’t see how a 9 foot high door is ever good enough for a farm building.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
