Having been an electrical engineer, electrical hobbyist of 60 years, a farmer and used tractor dealer, I have seen so many different types of, for the lack of a better word, "gauges" or "meters" referred to differently I couldn't count them. Much of this is a matter of semantics or local preferences or different terminology used in different trades or even geographical locations.
The tip "An ammeter shows amps being charged (+) or dis-charged (-) and reads from center to a range like -30 to +30, whereas an amperage gauge shows just the amps flowing in the electrical line. "
While that's NOT how I, an electrical engineer, might necessarily have phrased the tip, I understand the tipsters comment and based on experience and years of observation in the field find some merit in it. AS this is a tractor forum and as car truck and tractor ammeters indeed indicate + Charging amps INTO the battery, or - Discharging amps OUT OF the battery that term makes sense. Similar, having seen and designed "gauges" or "meters" for use in n circuits where the ONLY consideration was current flow period and there never was any doubt as to its direction, I understand the use of the term amperage "gauge". When I was an electrical designer and farmer and tractor dealer I more typically saw the term "ammeter" used in automotive applications, while in industry where it was ONLY the amount of current flow that was being measured and it was always one way, I often (not always) saw the terms "amp gauge" and yes also "ammeter" used. I'VE SEEN THEM CALLED/LABELED BOTH
Hey guys this forum is full of OPINIONS AND PREFERENCES AND WAYS OF DOING THINGS AND there is room for differing OPINIONS be they absolutely perfect or not and just because one person thinks one way or calls something one name is not the end all and ONLY way its done everywhere in all trades and locations. This is NOT "My way or the Highway" land lol. In nearly 30 years on here I've not found anyone to be perfect !!!!!!!!!!!! Has anyone else ???
TO EACH THEIR OWN OPINIONS AND PREFERENCES AND NAMING OF DEVICES and just because two cant agree does NOT make either a bad person.
Again, in all my years of design, engineering, and the specs I've written or reviewed, I've seen current measuring devices referred to as "ammeters" and I've seen devices referred to as "amp gauges" OR BOTH OR MIXED N MATCHED but OFTEN (not always) the zero centered + and - were called/labeled ammeters, while the single direction were often (not always) called/labeled gauges OR yes also ammeters.
Call then what you please is fine by me and I will do the same and we can both think were absolutely perfect lol I don't see this discussion as THERES ONLY ONE ANSWER AND NO ROOM FOR DISAGREEMENT !!!!!!!!!!! Each are free to call the instrument a meter or a gauge as they so wish, live and let live is my motto.
All here are free to agree or disagree with the tip and I've seen it done EITHER way so only you (no one else) can judge who is right and who is wrong, I say NEITHER...……...
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
