|
Tractor Talk Discussion Board |
Re: Magneto
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Todd Markle on December 09, 1998 at 18:18:13:
In Reply to: Magneto posted by Harold Powell on December 08, 1998 at 18:30:48:
Delco made a conversion kit to convert from a
mag to a distributor. You could probably find one
from a salvage yard as they were fairly common.
I believe the same setup fit any tractor that had a flange mounted magneto and a 4 cyl.engine .You could also take a distributor from a later H,M.C or A or super of any of these that came with a distributor from the factory. A word of caution though, if you still have the original charging system, the generator wont put out
enough current to run the ignition system and
lights at the same time. It will discharge with the lights on. If you have lights, either take the generator from the later tractor or switch to 12 volt system.
Follow Ups:
Post a Followup
|
