Tractor Talk Discussion Board |
Re: Oil bath weight
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tom-Pa on January 15, 2002 at 10:51:55 from (12.227.21.1):
In Reply to: Oil bath weight posted by Troy on January 14, 2002 at 20:24:36:
Ferguson and Ford both recommended using the same weight as in the engine. Basically 30 wt in the summer and 20 wt in the winter. If the oil is too thin for the weather, it will be sucked thru the filter material and into the engine, if too heavy, it restricts the amount of air the engine gets. 10 wt is much too thin. As Rod MI said, some get away with 10w30. Your decision. Good luck Tom-Pa
Follow Ups:
Home
| Forums
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|