Posted by Texasmark1 on November 01, 2019 at 05:07:29 from (172.243.92.145):
In Reply to: Air seat woes posted by gleanerguy on October 31, 2019 at 17:04:38:
+1 on checking the wiring as the seat moving and/or things being crammed (deliberately or accidentally) can break a crimp connection easily. BTDT
Then fuse and if so, look for the reason.....may be contamination at the fuses contact area. Heat builds up when there is corrosion and heat melts the fusing element.
I think those bags are made of Neoprene and they are pretty resistant to cracking like natural rubber cracks with age. However, if you know the pump is pumping, and you haven't blown a tube loose, or rubbed a hole in one by the seat's movement, then you may have a crack in your air bag. The bag seals seem to be pretty bullet proof.
Last, I find that they are sensitive to cold temperatures. Where one holds pressure in the summer, it won't in the winter if the tractor sits for awhile unused, seat will settle down. Haven't figured out the smoking gun on that as yet due to the difficulty in trouble shooting the suspect components under the seat. I have even removed mine (exiting through the rear window of the cab....working alone is a neat trick to pull off) and had it on the work bench and couldn't find anything leaking. Course, considering the volume of air in the bag, even a minute leak over a week or so could deplete the contents.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.