Re: Re: Patching up a Kohler cylinder head

Posted by butch in kansas on January 18, 2002 at 19:06:05 from (63.167.133.110):

In Reply to: Re: Patching up a Kohler cylinder head posted by george on January 16, 2002 at 14:30:05:

thats simple use a good grade of tapping fluid find a 18mm tapping kit install right size insert make sure its clean and use thread sealer supplied find the 18mm to 14mm bushing insert and your business again 18mm are getting hard to fine for oldd tractor so an adapter has been made to take them 14mm any good farm and auto parts house should have what you need when you weld allum its gets hard and with the fins that close the heat will travel fast and could warp then you will buy that new heado

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Patching up a Kohler cylinder head Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]