Re: brought the wrong volt lights

Posted by BB on January 21, 2002 at 10:10:36 from (152.163.189.201):

In Reply to: brought the wrong volt lights posted by allan on January 21, 2002 at 08:59:37:

I have to agree with Red Dave. There is no good solution to the problem. You can run the 6v bulbs until they burn out (which probably won't be long) and then put in the correct ones.
I am a little suprised you did not blow a fuse. The 6v bulbs should draw twice the amps of the 12v bulbs if they are the same wattage. I think I would make sure of the correct fuse size before using the 6v bulbs so you don't burn up any wiring.

Follow Ups:

• Re: Re: brought the wrong volt lights G Taylor 11:43:01 01/21/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: brought the wrong volt lights Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]