Figure your up north somewhere since both tractors have gas engines.
The SU is a 70 or later model, good tractor but as said it's swept back axle design isn't the best for loader work.
A front mounted hyd pump can be installed but that design hasn't been made in several years, one would need to locate a complete loader with the pump and ALL of the brackets and components necessary to attach it to that tractor.
The 4000AP is a earlier 65-68 model with the smaller lower hp engine but otherwise a nice looking tractor.
I wouldn't mind having that cab to put on my 4500 for winter hay feeding.
Horizontal exhaust can be installed by simply swapping exhaust manifolds and acquiring the proper piping and muffler.
My thoughts on exhaust routing, I've had both.
Vertical exhaust sticks up and partly blocks your view, will hit low hanging objects and possibly damage the exhaust, once low hanging limbs and brush clear the muffler they'll swing back and slap the crap out of the operator.
Horizontal exhaust offers clear view and the operator is first to deal with low limbs and ect. Low hanging exhaust can easily be destroyed by stumps, large rocks or other objects one might run over or straddle with the tractor. If the exhaust tip is angled down it can blow up large amounts of dust, pointed straight back it will heat up the left side lift arm to finger blistering temps (personal experience).
Your also dealing with the exhaust fumes anytime you working behind the tractor or hooking up a piece of equipment.
I now run vertical exhaust with the pipe cut to same height as the top of my head, most times the exhaust will blow up and over me, any thing low enough to hang onto the muffler will also hit me, so it needs to be trimmed to elevated.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Lifetime of Farm Machinery - by Joe Michaels. I am a mechanical engineer by profession, specializing in powerplant work. I worked as a machinist and engine erector, with time spent overseas. I have always had a love for machinery, and an appreciation for farming and farm machinery. I was born and raised in Brooklyn, New York. Not a place one would associate with farms or farm machinery. I credit my parents for instilling a lot of good values, a respect for learning, a knowledge of various skills and a little knowledge of farming in me, amo
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.