Your tractor was produced at a time of change and it has some strange features. The nose and grills are, as said, from a 1968 to 1975 County but the bonnet is from a 1966 to 1968 County which would have had a different grill and nose cone.
The 1004 was originally designated 954 (95 hp 4WD) with a Ford 2703E industrial engine. The 954 was produced from 1965 to 1967 when the engine was uprated to 100 hp (1004). In 1967 a further County, the 1124 was introduced with a further uprating of the engine to 113 hp and with a cast iron sump. This too used the early bonnet with louvres and the old style nose cone with the wrap around mesh grill. In mid 1968 the bonnet and nose cone changed to the smooth bonnet with no louvres and the nose cone and grill as you have fitted, when Ford introduced the Ford Force tractors in July 1968.
Pictures show the two bonnet/nose cone styles although these are on an 1124 they were the same on the 1004 apart from the bonnet "humps".
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
