farmallboy, as most would suspect, being a retired electrical power distribution design engineer, I have to recommend going with PVC and following the NEC even if you're not in a jurisdiction that requires such or even if it bears no relevance.
DOING SO MAY SAVE A LIFE AND/OR PREVENT A FIRE.
LIVESTOCK NOTE: When I last practiced in buildings used to house livestock there were certain specific rules relating to Grounding and Bonding so old bossie wouldn't receive a tingle shock and refuse to use an automatic waterer or feeder. The reason was with the Equipment GroundING Conductor running in parallel with the phase conductors enroute to the barn capacitance and inductance could cause the Ground system to be at a voltage elevated above earth at the barn so livestock standing on earth could receive a shock.
As always where fire and life safety is concerned at least consider consulting the NEC and trained professional electricians and engineers versus lay opinions when making critical decisions.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
