A 3x30 inch head will clear a swath 120 inches wide.....but you really want to stay about 10 inches from the next row, so if you combine is 100 inches or less from the outside of the tires with the ladder up, a 3x30 will work. You will also be able to travel further before the bin is full....something to consider if the rows are long and you have no buggy.A 4x30 is a nice head for that size machine, gives a good ground speed, nice balance and more row to row clearance. There are kits to mount a 5 or 6 row on an F2 but you will need extra weights on the rear and the bin would fill in a pretty short distance, and you will be down to 1 or may be 2 mph in 200 bushel corn.
Lots of variables to consider, but if the corn is lodging and the fields are soft, a 4 row wide or narrow on an F2 with the wide 23.1 x 26 inch tires makes a good unit, as long as the planter operator has done a good job .
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
