Posted by jturbo10 on April 09, 2020 at 19:20:33 from (76.1.80.24):
I have a 1965 John Deere 3020 gas row crop that I'm changing the hydraulic and transmission fluid from 303 to HyGard. I checked my operating and service manuals which said there were two drain plugs. One small square plug on the side of the transmission area and the large square one in the drawbar frame. I've always only drained the large one and filter and didn't even know about the small plug. When I took the small plug out with the large one still in the frame there was only a few drops of fluid coming out. Got about 7-8 gallons when I opened the large one which is normal. Anyone know what cavity the small plug drains and should fluid have drained out of it? I hate to put 8 gallons of HyGard back in if I have a problem internally. Far as I could tell, there is only one fill area on the right side of the seat. Set me straight, what am I missing. John Deere service techs had no idea what I was talking about...guess too old of a tractor for them. Happy Easter.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
