Posted by Jim.ME on May 05, 2020 at 06:02:01 from (67.242.176.27):
In Reply to: Baled hay posted by grandpa Love on May 05, 2020 at 05:05:00:
I have noticed in several of your postings you rake counterclockwise. Have you tried going the other direction when you are raking? Roll the back swath in (travel counterclockwise) then turn and roll almost a full rake width out onto it, making one windrow. Then continue working clockwise around the field. I find it cleaner to minimize travel on the downed hay and to travel on and pull hay away from the laying hay than trying to clean the laying hay away from a rolled windrow. We often leave the outside window to last and bale it counterclockwise if it is too near the tree or fence line. Also if the hay is light set in 2 or 3 swathes make the two or three passes needed to roll them out to make one larger windrow. (Same distance/fuel to rake a field, but less distance traveled, fuel, and run time on the baler.) Just my experience, each to his own. Enjoy and have fun with the family.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
