The farmer that I worked for had a John Deere 7000 planter that was 60 ft. wide. It folded up to around 20 ft. wide, but it was not too easy to fold. Luckly one farm had 5 center pivots with no fences between them. I had to widen only one gate to get it in. The other farm with the biggest center pivot had no fences. I pulled it with a TW35 Ford that didn't even know it was back there. I'm not sure but I think it had been turned up. I later bought that Ford; biggest mistake I ever made. That planter later sold for $800 after the farmer died, and it was in perfect working condition! I did a lot of welding on the marker arms. You can see how long they are in svcummins picture. The guy that bought the planter is a Mexican neighbor that buys farm equipment and hauls it to Mexico. He cut it up and makes planters with 5 boxes. I estimate that he made 20 times what he paid for it. Trouble is, he has to bribe the border agents, at least that's what I call what they charge.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
