Thanks so far. I'm learning here anyway. Ran it again after 23 hours. Ran it full flow for a couple minutes at what looks like about 8 psi. Choked it down to 60 psi for another 6.5 minutes. With that psi it is hard to get a bucket test but it was 25 to 30 seconds for roughly 10 gpm with a recharge rate of about 5 gallons per hour. Think some of math was wrong yesterday and maybe before.
Have a new idea to speed the process up. Instead of waiting on the back ordered 1.25 inch 125 psi rated PE pipe, what if I ran schedule 40 pvc 1.25 inch pipe? What I don't know is how flexible would it be for installing and pulling without breaking or being too heavy. I can get it in 10 or 20 foot lengths and can rig up a 12 foot A frame. Don't have any slips but can use ropes with multiple wraps. Just don't know how 150 feet of pipe would stick up and over without breaking or being too hard to manage. Thanks, Britt. Thought I took pics of my pump setup but can't find them on my phone.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
