|
Tractor Talk Discussion Board |
Re: MF 85 - Carburetor/ Governor problem
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Gerald on December 18, 1998 at 14:35:23:
In Reply to: MF 85 - Carburetor/ Governor problem posted by Tom Pfotzer on December 18, 1998 at 13:05:37:
Have you checked the flow to the carburetor by removing the drain plug from the bottom of the carburetor. Fuel should gush out as you empty the bowl then run a steady stream. If it dribbles or slower after the gush, you have a plugged feed system. Could be the inlet elbow screen (very likely), a stuck float, a varnish filled line, a varnish filled screen in the sediment chamber or a worn float valve. I've seen all of the above without running a tractor fixing shop. Have you checked with CT for a carb kit? 888-8CT-FARM. Gerald
Follow Ups:
Post a Followup
|
