Re: Re: Gas Tank Repair

Posted by Ijaz Ahmad Rao on December 18, 1998 at 23:27:31:

In Reply to: Re: Gas Tank Repair posted by Charles on March 21, 1998 at 12:16:49:

Dear Sir

We are looking for new or used or reconditioned Cylinders of
Specification as:

50, 55, 60, 80 W.liter capacity for CNG or NGV purpose.

Cylinder Standards

(1) NZS 5454, (2) ISO / DIS 11439, (3) IS 7285, (4) NGV TYPE2 OF US

Materials of construction: Chromium Molybdenum alloy steel.

Working Pressures and Test Pressures: Working Pressure 200 bar
Test Pressure 360 bar
Burst Pressure 450 bar - (Minimum)

I will appreciate if you could also advice us, about New / Used /
reconditioned / Refurb. Compressor of the following requirement.

Compressor & Engine: 4 STAGES Compressor, 4-cylinder Water-cooled
compressor.
Motor: 30 HP or above but not more than 100
HP
Maximum Discharge Pressure: 3600- 5,000 PSIG
Inlet Pressure Range: 8 PSIG
Nominal Flow Rate: 100-230 SCFM @ 5,000 PSIG
Ambient Temperature Rating: -10 degrees CO to + 50 degrees CO

Priority / ESD Panel: 3 stage - Storage 3000-3600
Storage Capacity: 39,000 SCF @ 5,000 PSIG

It is for CNG OR NGV Fuel filling Station.

Please advice us with your interest or let us have any other contact,
which may be useful for us.

Thanks and best regards

Ijaz Ahmad Rao

Fax: 92-42-5711796

Email: luckystr@ms.net.pk, luckystr@wol.net.pk, luckystarpk@yahoo.com

Follow Ups:

Post a Followup