Posted by Ron Tron on October 16, 2020 at 09:03:35 from (108.185.181.31):
In Reply to: Rear tires sizes posted by Ron Tron on October 15, 2020 at 13:25:24:
Quoting Removed, click Modern View to see
I wish it was easier to post pictures here. It's time yesterdaystractor to upgrade there software. LOL
That being said its a 9N .....It looks exactly like my 39 9N that I have had for 20 years. I bought this one from Kelly Johnson's step son who told me it was owned by Johnson and used it on his ranch near the Reagan ranch in Los Olivos. Kelly Johnson was the guy who started skunkworks and developed the SR71 so I have painted it black and silver and call it the Blackbird. Anyway I just measured the bolt pattern on both of them and they are the same. 7 3/4" from bolt to bolt and 15 1/2 " across. but the Blackbird rims are 24 inches and the old gray is 28 inches...........any help?
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
