Posted by Dave41A on November 08, 2020 at 16:03:29 from (71.161.71.112):
Good evening. I have a '82 Deere 650 and a Deere 1025R. I have the option of buying a fairly good size match loader for a Mahindra tractor...48 inch bucket, etc. However, the brackets clearly won't match. GPM's on the pumps are also slightly lower on the Deere than the Mahindra, but not by much.
My question is merely to get insight from anyone who has fabricated or modified brackets for a loader. Ideally it would go on the 650. Intended use is light-duty work around the yard and in the woods. My 650 has the power-beyond valve, but I would need to fit it with a low pressure return line to the hydraulic sump/transmission. The "proper" loader (Deere 67) is next to impossible to find. The Mahindra is about 1/2 the price of made-to-fit aftermarket loader.
I have access to suitable shop facilities at work. Any insight is appreciated. Thanks in advance. Dave
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
