|
Tractor Talk Discussion Board |
Re: 1950 J.D. G cylinder head studs.
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Gerald on December 22, 1998 at 09:04:34:
In Reply to: 1950 J.D. G cylinder head studs. posted by JOhn on December 21, 1998 at 21:00:40:
McMaster-Carr Supply has 3/4-10 x 8 studs with 2" thread on each end for $3.12. These have a square wrench flat at the middle. In an alloy steel good for 125,000 psi. Or fully threaded in B7 alloy steel (rated at 125,000 psi) for $1.93. They also have threaded rod in the B7 alloy in 3,6 and 12 foot lengths but the 8" chunks are a better deal. To make them a machine shop would probably use the same alloy or one locally called "stress proof" that is strong and machines well. Gerald
Follow Ups:
Post a Followup
|
