Posted by wore out on December 03, 2020 at 06:06:26 from (64.255.159.199):
In Reply to: New Ford truck advice posted by M Nut on December 02, 2020 at 15:48:48:
Quoting Removed, click Modern View to see
"For model year 2019, GM started using aluminum on hinged body panels.
i.e. hood, doors and tailgate."
You are a little late with that date.
My 2001 Yukon has an aluminum tailgate, and I believe GM used aluminum hoods and possibly trunk lids on certain cars well before that.
The Yukon tailgate has aluminum "cancer" where the wiper arm pivot passes through and in the area where the gas support struts attach.
4 or 5 years ago, I asked on the "Paint and Bodywork" Forum here what could be done to stop the corrosion of the aluminum from spreading and popping more paint off and got NO replies.
For rusting steel, phosphoric acid will "kill"/neutralize rust,goes anyone know what can be done with corroding aluminum?
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
