Posted by The tractor vet on January 18, 2021 at 16:35:44 from (104.179.81.68):
In Reply to: Re: 3406 Cat Crank posted by showcrop on January 18, 2021 at 12:18:06:
The 98 9400 i was driving there for a while on the over sized stuff with the 3406 E turned up somewhere around 740 so they say with 3.90 gears on tall 24.5's in the summer months would do .6.5 to 6.7 everyday running hard , when winter came and the truck running 24-7 i was still getting decent mileage between 5.9 and 6.2 . running heavy most of the time . Only light loads if you want to call them light were the New Gradalls at around 48-49 grand but still was and over load due to light weight. The OLD Cummins stayed around 5.5 to 5.8 and that was a bunch better then the days with the 318 and a avg of 3.7- 4.2 and a gallon a day on oil . Back in the early coal hauling and only running about a max of a 100 miles one way We would normally burn around a 120-150 gallon of fuel a day and a gallon of Delo 100 30 weight , Come in at night and stuf the two hoses in the tanks and go fetch a gallon of oil then thump tires and check the coolant . Then ya may need to adjust brakes . Back in the fun/ outlaw days we had a blast and it was a competition on who had the running trucks , who hauled the big Jag's , that title went to Big D Martin when he bought the 34 foot City Welding trailer with three on the ground and a forth on air and twin 12 inch HyCo scopes in the nose . And a new 359 Pete up ft with a 1693 Cat cranked up from day one . He loaded a load of Manginess ore out of the Revenna arsenal that was a foot over top the boards on a 6 foot deep trailer and had to be split weighed at S H BELL on scales that went to 160000 lbs and pegged the scales then found out even with the twin scopes he could not lift the load and they had to clam off half before he could lift it and dump. I worked for Big Dee and he told you when you started he did not want to see any bills come in the office with less then 35 ton Tat day he put the super charge on i was pulling out as he was coming in to load and asked me if i had enough on because he could not see it i had the 32 foot City with and air axle lead on the tri . I was about half full up the 6 foot sides and had 65 and a half ton on. I was glad it was going DOWN to the river and not try bring that up off the river since them hill coming UP off the river were Steep .
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.