Posted by flying belgian on February 08, 2021 at 20:40:58 from (216.114.228.39):
In Reply to: Incredibly frustrated posted by jon f mn on February 08, 2021 at 16:52:52:
The 2 speed on my CX-100 Case worked intermittently when I bought it 12 years ago. I traced the wires and thought I found the problem. Worked for a week then not. took it to dealer. He fixed it and it worked for a week. Then not. Oh now it does. Two months later, now it don't. Take it back to dealer but it starts working before I get there. They keep replacing switches and wires and send me home. I have literally thousands of dollars sticking in that two speed. One time when it quit working during planting they sent a guy out to the field to catch it in the act. He took it apart said he fixed it. It worked every time until he left. 5 min. later it quit working. Last summer I asked them if they could fix it or not? They said they could and it will not cost me anymore money from here on in. They fixed it and sent me home. Month later and it is doing exactly what it did 12 years ago and many thousand dollars ago. They have "fixed" it 8 times now and nothing has changed. I'm scheduled to bring it back in next month.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
