Posted by Kelly In TX on February 16, 2021 at 15:37:50 from (67.143.129.193):
We're in south Texas, between Austin and San Antonio. We're a bit elderly, 77 and 81. Our weather has been and IS NASTY! We had 6" or so of snow and some of it drifted to to 18". The temp. was about 6 degrees (F) this morning. I've been feeding my five draft horses grain each morning and my ten miniature Herefords cubes daily. I've been lucky cuz the diesel tractor started yesterday and I was able to put out a round bale for the animals and the four wheeler started both days for feeding the cubes to the cows. The only source of heat in our home is electricity. We have electricity most of the time. About a half-dozen outages per day, so far none longer than four hours. House has stayed quite comfortable. BUT, we've had SO MANY neighbors check in on us. It just warms the heart. They aren't relatives and many don't live nearby, but they've gone out of their way to check in on us in person and via phone and via computer. There are SO MANY WONDERFUL PEOPLE IN THIS WORLD!!! I've always enjoyed these forums for the info, the good comaraderie (sp?), sometimes the teasing and the people who appreciate what they have and each other. GOD Bless y'all kelly
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
